Floor grinder is mainly used for concrete floor grinding projects. It can effectively polish terrazzo, concrete surface and epoxy mortar layer, and old epoxy ground.
It is light, flexible and high work efficient. The industrial vacuum cleaner can be directly connected to the floor grinder, avoiding the trouble of two power cords when working. It is the best choice for a floor project machine. 1. Before using the machine, check the integrity of the machine to ensure that the operation control and electrical parts of the machine are free from humidity, and the operation control switch knob is intact.
2. Understand the actual construction and base surface conditions, and select the appropriate machine speed.
3. Choose the grinding method according to the base surface, such as dry grinding or water grinding. When using water mills, you should pour clean construction water into the water tank first. Do not fill it too much to prevent water splashing into the electric box when the machine is tilted or when installing and replacing abrasives, causing damage to the machine. At the same time, it should be ground in time with the water suction machine. The water is cleared.
4. Install and replace the grinding disc. According to the construction situation and construction process, choose the matching grinding disc, and ensure that it is installed and firm. When installing the grinding disc, tilt the machine, the support frame is in contact with the ground, the machine's operation switch is adjusted to the off position, and the emergency stop button is pressed and locked.
5. Install the waterproof cover. The connection of the waterproof cover should be at the rear end of the machine, put the machine back in working condition, and adjust the construction folding handle to a convenient operation state.
6 Ensure that the leakage protection device is normal. Connect the waterproof power plug of the machine to the socket of the machine, check that all the control buttons of the machine are in the off state, and connect to the power source.
7. When the water mill is used, the water switch should be turned on to ensure that the water flow is like the construction ground, the working speed is selected, the emergency stop button is bounced, and the operation direction is selected for operation.
8. During the use of the machine, ensure that the machine cable and the machine grinding head keep a certain distance to avoid personal injury caused by the machine feet.
9. Stop operation. Press the emergency stop button, turn off the water switch, and disconnect the power supply when the floor grinder stops for a long time.
10. Clean up the residual water in the floor grinder after finishing the work.
Publication Date: 12 January, 2021
Category:
Concrete Floor Grinder
